S O F T W A R E I N S T A L L A T I O N
Data Device Corporation
BU-67121W Manual
Rev B – 6/16
41
Figure 35. Programming firmware
Once the firmware is done programming, you will be asked to
power cycle
the AIC.
You will see a successful 100% for the progress bar as well as it entirely highlighted
in green.
You can now press the power button on the AIC until it has turned off completely.
After the device has been powered off and is to be powered back on, do
NOT
hit the refresh button on your browser to refresh the AIC web
interface.
Simply click the Home option on the web interface screen or restart your
browser and type in the IP address again.
Hitting refresh will cause the browser to reload the last known saved form
data.
In this case the form data would be the firmware .bin file.
This will cause the device to restart the flash programming again
