H A R D W A R E I N S T A L L A T I O N
Data Device Corporation
BU-67121W Manual
Rev B – 6/16
25
Figure 16 is the 24-Pin FFC. It is shorter and wider compared to the 20-Pin FFC.
Again, the Blue side (left hand side) represents the top side of the cable, where the
bottom side (right hand side) shows the leads of the connector.
Figure 16. 24-Pin FFC
If installing the BU-67114H 1553 card, use the 20-pin flat flex cable and connect to
one of the 20-pin sockets. Either 8a or 10a from Figure 12.
If installing a DD-40001H ARINC 429 card, use the 24-pin flat flex cable and connect
to one of the 24-pin sockets. Either 8b or 10b from Figure 12.
When connecting the FFC cable into a Mini PCI-e card, the blue side should be
facing up when inserting the cable into the cards connector.
On the AIC mainboard side, the blue side of the FFC cable should face towards the
front panel of the AIC, since the onboard header is a vertical slot. See Figure 14 To
see the onboard headers.
6.4.1.2 For installing a 3
rd
party card
In order to utilize the front panel connectors of the AIC with your Mini PCI-e card, you
will have to create/purchase a FPC flex cable.
