H A R D W A R E I N S T A L L A T I O N
Data Device Corporation
BU-67121W Manual
Rev B – 6/16
20
You can take the front panel bezel by the sides and start sliding the main board out.
The board sits on grooves in the inside of the chassis, be careful sliding out the board
too fast. It may slide out of its grooves and hit your working surface.
See Figure 11. Sliding Out Main Board, below.
Figure 11. Sliding Out Main Board
6.3 AIC Main Board
Figure 12 and Figure 13 depict the AIC main board, top and bottom.
The onboard connectors and card slots are numbered. Refer to Table 2 and Table 3.
to see what the numbers correspond to.
