Carbon structure from different angle.
When all updates are installed, make sure elevator is flat and deflect easy to both sides.
Now it is good time to glue in flat carbon pieces to V shape openning we cut earlier. When you glue
flat carbon inside depron, glue fiberglass square plate on top and bottom of elevator as shown in
picture.
Same optional
reinforcement
update
with carbon can be done
on milled elevator. For
Wing reinforcement I use 1mm carbon rods and for elevator I use 0.7mm carbon rod ( 0.7mm
carbon does not come with kit).
When all updates are installed, make sure aileron is flat and deflect easy to both sides.
10