DCT e-track, Руководство пользователя

Страница: 104 / 212

4.22. SCENARIOS AND EXAMPLES (SCRIPTS)
If no user-message is defined with the
XATM
message the following
message is sent:
e-track:EXAMPLE
Event:05
-----
If on the Destination Point we change the underlined “
1
” for a “
0
”
we receive an
EV
message on the Phone Number instead of the user-
defined text, something like:
>REV050000000000000000001;ID=EXAMPLE<
At the same time the button is pressed, an
EV
message is also sent to
the remote Tracking Server. Notice that we did not change the defi-
nition of the periodic report event (event
37
), so the periodic report
is still being sent to the Tracking Server only.
If no SMS is received on the Phone Number-type destination, consider
the following:
•
The unit can only send SMS messages when registered on GSM.
The
Network LED does not have to be solid ON.
•
The cellular carrier has to provide SMS sending capabilities to
the cellular line being used by
e-track
TM
’s .
•
The phone number 912345678 may not be exactly the phone
number that should be used for sending SMS messages. A plus
sign with country/area code or similar may be required. See
the note on the
Over The Air section of the Operation chapter.
Script
This example which is based on the Getting Started example is re-
sumed on the following script:
#e-track script
#Getting Started example
# + SMS reporting
#Delete any previous configuration
>SRT;CONFIG<
>SXADP**U<
#Unit’s ID
>SIDEXAMPLE<
#configuring the SIM’s PIN
102