DCT e-track Скачать руководство пользователя страница 15

Страница: 15 / 212

Preface

This document is the

e-track

’s

User’s Guide. On this document you

will find information on what is

e-track

, its features, specifications,

installation instructions and explanation on the unit’s configuration
and operation.

This document is available at:

www.digitalcomtech.com

Refer to this site or to your

Digital Communications Technologies

contact

for the latest version of this document.

0.1

Scope

This manual is intended to be used by anyone interacting with the
unit and having some basic technical knowledge.

After reading this document the reader will be capable to install,
configure and operate the unit on a tracking environment.

0.2

Organization

This document is organized in the following way:

•

The

About

chapter gives a functional and physical description

of the unit.

•

The

Operation

chapter gives information on how to interact

with the unit.

•

The

Assisted Configuration

chapter gives information for the

end-user on how to configure and set up the unit.

•

The

Manual Configuration

has advanced information intented

for developers and managers of Location Systems.

0.3

Technical Assistance

You can contact

Digital Communications Technologies

for technical

support at:

[email protected]

Содержание e-track





















































































































































































































Результаты поиска

Содержание e-track

Отзывы:

DCT e-track, Руководство пользователя, Страница: 15 / 212

Результаты поиска

Содержание e-track

Отзывы: