Manuale d’istruzioni PM1750 MACCHINA PER LA PASTA
dcg16.it
14
4) Pour the measured flour into the
mixing bowl.
5) First align the top cover lid card position
with the notch on the front of the mixing bowl
of the fuselage, press down, and install it in
place when you hear a "click".
6) Plug in the power and press the "On/Off"
button, and then press the corresponding
"Auto" button according to the ratio of the
surface. After the stirring is turned, slowly
pour water into the water inlet of the top
cover according to the surface water ratio
reference table.
Note: The water must be poured after the
machine is turned.
7) After about ten minutes, the machine
will give an alarm and the noodle making
will be completed automatically.
Step 1: Cleaning the mixing bowl.
After the dough is air-dried, wipe it with
a cleaning spatula or cloth.
Step 2: After the mixing alex cleans the
dough and air-dry, use a cleaning
spatula to remove the remaining dough.
Step 3: After the disc is air-dried,
place it on the hard panel and pat it
gently, and the dough will fall off
automatically; if there is any residue,
clean it with the metal needle of the
cleaning scraper.
Reminder: After using the noodle maker, do not clean it
immediately. Remove the parts that are in contact with the flour,
freeze or leave it to dry before cleaning. It is forbidden to
immerse the body in water or other liquids to avoid leakage
of electricity.
Use method
Cleaning method
13
14
Pulizia
Passaggio 1: pulire la ciotola per impastare.
Dopo che i residui di impasto si sono asciugati
all’aria, pulire la ciotola con una spatola o un
panno.
Passaggio 2: dopo che i residui di impasto rimasti
sull’asse per impastare si sono asciugati all’aria,
rimuoverli con una spatola.
Passaggio 3: dopo che il disco si è asciugato
all’aria, posizionarlo su una superficie robusta
e picchiettarlo delicatamente, in modo che i
residui di impasto si stacchino automaticamente;
se rimangono dei residui, pulire il disco con l’ago
in metallo della spatola in dotazione.
Promemoria: non pulire la macchina subito dopo l’utilizzo. Rimuovere
le parti che sono entrate in contatto con la farina e metterle in
freezer o lasciarle asciugare, e solo a questo punto procedere con le
operazioni di pulizia. È vietato immergere il corpo principale in acqua
o altro liquido, onde evitare dispersione di elettricità.