Instruction Manual PM1750 PASTA MAKER
dcg16.it
24
Before the first use of the product, please thoroughly clean the parts in
contact with the ingredients.
1. Operation instructions
2. Status description
Ÿ
1. Initialization state: Plug in the power supply, indicate the water length
and humidity for 1.5 seconds, and the machine enters the standby state. In
the standby state, press "Stop/Automatic presentation: "Manual
presentation", the indicator light is on and the machine enters
Ÿ
2. In the power-on state, when the top cover is closed in the standby state,
when the function is selected, the indicator light is always on, and the
noodle machine automatically enters the corresponding working state. At
this time, pressing other function selection keys is invalid.
1.Button description
This machine has "stop", "automatic appearance", "manual blending", a
total of 2 buttons to stop" button: used to cut the oar to enter the work,
shutdown state
Ÿ
3. Pause
Ÿ
In the standby state, if it is detected that the top cover is opened, even
the function key is pressed, the noodle machine does not enter the
working state, and the motor does not rotate. In the working state, if the
top cover is detected to be opened, the motor will immediately stop
rotating and put the top cover back into the working state within 1 minute,
and return to the off state without putting the top cover back after 1 minute.
3. Process description
Ÿ
1. Come out manually
Ÿ
3. Come forward automatically
Ÿ
2. In the standby mode, press the "Manually" button to select, the function
indicator light is always on, and the turn is 4 minutes and 25 seconds,
pause for 5 seconds, and the process of reversing 30 seconds is over (it
takes 5 minutes)
Ÿ
4. In the shutdown state, press the "automatic appearance" key function,
the function indicator light is always on, reverse mixing for 3 minutes,
pause for 5 seconds, and it takes about 12 minutes to rotate forward.
2.Product disassembly instructions
1. Disassembly steps (before disassembly, be sure to turn off the
switch and disconnect the power)
1).Rotate counterclockwise,
unscrew nut and exturding pipe,
disc.
2).Remove the disc and
extruding axle
3). Remove the
extruding pipe.
Use method
Use method
4)Hold the top lid open with thumb,
raise the end face of the top cover lid
at the same time with forefinger,
remove the top cover lid.
5
)
. Remove the mixing alex
.
6).Remove the mixing bowl
.
Knead
On/Off
07
08
