18
5.4.20 Test Tools
The Test Tools (TT) menu summarizes the test and troubleshooting
commands. These commands are listed separately to reduce the clutter
in the main help list, but are always active at the command prompt.
COMMAND
LOCAL REMOTE PARAGRAPH
Capture Port
CA#
RCA#
5.4.21 & 22
Copy Command
CC#
RCC#
5.4.23 & 24
Show RS232
SR
RSR
5.4.25 & 26
Test Message
TM#
RTM#
5.4.27 & 28
Remote Test Loop
RTL#
5.4.29
Monitor Port TX
MT#
5.4.30
Monitor Port RX
MR#
5.4.30
NMP Parity
P
5.4.31
Port Reset
PR
5.4.32
Reset MUX
RESET
5.4.33
5.4.21 Capture Port
The Capture Port command (CA#) permits the network management
port to capture any of the local ports. While this command is active, the
normal data path is interrupted and a two-way communication link is
established between the network management port and the captured
port. A port number must be included on the command line.
The Capture command is active until two consecutive ESC characters
are issued.
5.4.22 Remote Capture Port
The Remote Capture port command (RCA#) connects the network
management port to any mapped host port. During this time, normal
data communications are suspended and the NMP terminal can talk
directly to the host computer port. The number argument must be a
mapped drop port number.
The Remote Capture command is active until two consecutive ESC
characters are issued.
