22
dBm
Advanced Channel Emulator
ACE9600
Operations Manual
The
LAN
key invokes the instrument’s ethernet configuration
display.
The
About
key invokes the instrument’s hardware configuration
display.
To view the instrument’s hardware configuration
Figure 2-4. The About display
The Multi-Chassis Timing Sync Mode provides the ability to
synchronously start up to four chassis’ in dynamic mode.
Press one of
the three radio buttons to configure the instrument as Master, Slave, or
Standalone.
For
a
detailed
description,
see
Multi-Chassis
Synchronization under Dynamic Mode Control.
To s to re th e in s tru m e n t s e ttin g s
Pressing
Store
activates the Store Settings display. A storage register
contains all Instrument State settings, static parameter values, Update
Rate, RF Center frequency, step sizes, and loaded Dynamic file names.
It does not retain the current channel selection, Mode, elapsed time, or
Start/Reset/Pause status.
1.
Press the
Store key
. The store utility display appears. Press the
number of the desired register to be updated. Store can be invoked
from Static or Dynamic modes.
2.
Press a number from 1-8, designating a register to store the current
instrument settings. Register 0 (labeled
Preset State
) defines the
power up and Preset state. The register is overwritten.
