8
Figure 11 – Connect to Lifeline: Step 5
Figure 12 – Connect to Lifeline: Step 6
3.6 CONNECTING THE LANYARD TO THE BODY SUPPORT:
(See Figure 13) Attach your lanyard (A) to the wire rope
grab D-ring (B). When using an energy absorbing lanyard,
the pack end of the lanyard is attached to the back D-ring
on your body harness (C). When using a body belt (for
restraint applications only) connect the restraint lanyard
to the D-ring on your body belt. Ensure all connections are
compatible. See lanyard and body support manufacturer’s
instructions for more information.
3.7 POSITIONING THE WIRE ROPE GRAB ON THE
LIFELINE:
This wire rope grab is designed to remain in
place on the lifeline. To reposition the wire rope grab on the
lifeline, follow these steps:
1.
Lift the wire rope grab handle up to release it from its
current position.
2.
Raise or lower the wire rope grab to the new position.
Position the wire rope grab at or above your back D-ring
to minimize free fall distance
.
Figure 13 – Connection
C
A
B
3.
Check the locking action by lifting the handle up and releasing. The wire rope grab must lock onto the
lifeline.
Do not use if the wire rope grab will not operate correctly.
4.0 TRAINING
4.1
It is the responsibility of all users of this equipment to understand these instructions and to be trained in
the correct installation, use, and maintenance of this equipment. These individuals must be aware of the
consequences of improper installation or use of this equipment. This user manual is not a substitute for a
comprehensive training program. Training must be provided on a periodic basis to ensure pro
fi
ciency of the
users.
IMPORTANT:
Training must be conducted without exposing the trainee to a fall hazard. Training should
be repeated on a periodic basis.
5.0 INSPECTION
5.1 UNSAFE OR DEFECTIVE CONDITIONS:
If inspection reveals an unsafe or defective condition, remove the
Wire Rope Grab from service immediately and destroy it.
IMPORTANT:
Do not alter or attempt to repair the wire rope grab. Do not make substitutions for the wire
rope grab parts. Repairs may only be performed by an authorized service center.
5.2 PRODUCT
LIFE:
The functional life of DBI-SALA wire rope grabs is determined by work conditions and
maintenance. As long as the product passes inspection criteria, it may remain in service.
Содержание LAD-SAF 5000338
Страница 2: ...2 ...
Страница 10: ...10 8 0 LABELING This Identification Label must be present and completely legible ...
