background image

LIMITED LIFETIME WARRANTY

Warranty to End User:

  D B Industries, Inc., dba CAPITAL SAFETY USA (“CAPITAL SAFETY”) warrants to the 

original end user (“End User”) that its products are free from defects in materials and workmanship under 

normal use and service. This warranty extends for the lifetime of the product from the date the product is 

purchased by the End User, in new and unused condition, from a CAPITAL SAFETY authorized distributor.  

CAPITAL SAFETY’S entire liability to End User and End User’s exclusive remedy under this warranty is limited 

to the repair or replacement in kind of any defective product within its lifetime (as CAPITAL SAFETY in its sole 

discretion determines and deems appropriate).  No oral or written information or advice given by CAPITAL 

SAFETY, its distributors, directors, of

fi

 cers, agents or employees shall create any different or additional 

warranties or in any way increase the scope of this warranty.  CAPITAL SAFETY will not accept liability for defects 

that are the result of product abuse, misuse, alteration or modi

fi

 cation, or for defects that are due to a failure to 

install, maintain, or use the product in accordance with the manufacturer’s instructions.

CAPITAL SAFETY’S WARRANTY APPLIES ONLY TO THE END USER.  THIS WARRANTY IS THE ONLY WARRANTY 

APPLICABLE TO OUR PRODUCTS AND IS IN LIEU OF ALL OTHER WARRANTIES AND LIABILITIES, EXPRESSED 

OR IMPLIED. CAPITAL SAFETY EXPRESSLY EXCLUDES AND DISCLAIMS ANY IMPLIED WARRANTIES OF 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SHALL NOT BE LIABLE FOR INCIDENTAL, 

PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST PROFITS, 

REVENUES, OR PRODUCTIVITY, OR FOR BODILY INJURY OR DEATH OR LOSS OR DAMAGE TO PROPERTY, UNDER 

ANY THEORY OF LIABILITY, INCLUDING WITHOUT LIMITATION, CONTRACT, WARRANTY, STRICT LIABILITY, TORT 

(INCLUDING NEGLIGENCE) OR OTHER LEGAL OR EQUITABLE THEORY.

Certi

fi

cate No. FM 39709

I S O

9 0 0 1

CSG USA & Latin America

3833 SALA Way 

Red Wing, MN 55066-5005 

Toll Free: 800.328.6146

Phone: 651.388.8282

Fax: 651.388.5065

[email protected]

CSG Canada

260 Export Boulevard 

Mississauga, ON L5S 1Y9 

Phone: 905.795.9333 

Toll-Free: 800.387.7484 

Fax: 888.387.7484 

[email protected]

CSG Northern Europe

5a Merse Road

North Moons, Moat

Reditch, Worcestershire, UK

B98 9HL

Phone: + 44 (0)1527 548 000

Fax: + 44 (0)1527 591 000

[email protected]

CSG EMEA

(Europe, Middle East, Africa)

Le Broc Center

Z.I. 1ère Avenue

5600 M B.P. 15 06511

Carros

Le Broc Cedex

France

Phone: + 33 4 97 10 00 10

Fax: + 33 4 93 08 79 70

[email protected]

CSG Australia & New Zealand

95 Derby Street

Silverwater

Sydney NSW 2128

AUSTRALIA

Phone: +(61) 2 8753 7600

Toll-Free : 1 800 245 002 (AUS)

Toll-Free : 0800 212 505 (NZ) 

Fax: +(61) 2 87853 7603 

[email protected]

CSG Asia

Singapore:

16S, Enterprise Road 

Singapore 627666

Phone: +65 - 65587758

Fax: +65 - 65587058

[email protected]

Shanghai:

Rm 1406, China Venturetech Plaza

819 Nan Jing Xi Rd,

Shanghai 200041, P R China

Phone: +86 21 62539050

Fax: +86 21 62539060

www.capitalsafety.com

The Ultimate in Fall Protection

Содержание LAD-SAF 5000338













Отзывы: