WARNING:
This product is part of a
personal fall arrest system. The user
or rescuer must read and follow the
manufacturer’s instructions for each
component or part of the complete
system. These instructions must be
provided to the user/rescuer utilizing this
equipment. The user/rescuer must read
and understand these instructions or have
them explained to them before using this
equipment. Manufacturer’s instructions
must be followed for proper use and
maintenance of this product. Alterations or
misuse of this product or failure to follow
instructions may result in serious injury
or death. If this product is resold outside
the original country of destination, the re-
seller must provide these instructions in
the language of the country in which the
product will be used.
IMPORTANT:
If you have questions
on the use, care, or suitability of this
equipment for your application, contact
Capital Safety.
IMPORTANT:
Before using this
equipment, record the product
identi
fi
cation information from the ID
Label in the “Inspection and Maintenance
Log” at the back of this manual
Figure 1 - FlexiGuard Boxed-Frame Rail Fall Arrest System
NOTE:
This
fi
gure illustrates a Four-Leg Boxed-Frame System.
Boxed-Frame Systems are custom designed to customer
requirements and will vary with the intended application.
DESCRIPTION
BOXED-FRAME RAIL FALL ARREST SYSTEM:
The four and/or six leg Boxed-Frame System is a frame supported
trolley rail assembly for overhead anchorage of Capital Safety fall arrest or fall arrest restraint equipment.
Wheeled trolleys travel along rail assemblies and serve as moving anchorage points for Self-Retracting Lifelines
(SRLs) and Lanyards. The rail assemblies are supported in an overhead position by an overhead super structure.
Swiveling wheel assemblies and top-wind jacks provide portability and secure positioning.
IMPORTANT:
The Boxed-Frame Rail Fall Arrest System shall only be used as supporting structure for Personal
Fall Protection Equipment. It shall not be used as supporting structure for lifting equipment.
GLIDE RAIL:
The Glide Rail System (Figure 2) is the main component of the frame system. It is a rail and trolley
system for horizontal anchorage of Capital Safety personal fall arrest or fall restraint equipment. Wheeled Trolleys
travel along a Rail Assembly and serve as moving anchorage points for Self Retracting Lifeline (SRLs) or Lanyards. Rail
sections are supported from the overhead structure by Mounting Brackets comprised of various combinations of Beam
Clamps, Connector Channels, and Extensions.
© Copyright 2014, Capital Safety
Form: 5903123 Rev: D
USER INSTRUCTION MANUAL
BOXED-FRAME RAIL FALL ARREST SYSTEM
This manual is intended to meet industry standards, including OSHA and ANSI Z359.1-2007,
and should be used as part of an employee training program as required by OSHA.
The Ultimate in Fall Protection
Boxed Frame Rail
Fall Arrest System
Model Numbers:
8530245, 8530345, 8530491, 8546050, 8560588
CEN/TS 16415:2013
CE Type Test
No. 0086
BSI Product Services
Kitemark Court
Davy Avenue
Knowlhill, Milton Keynes
MK5 8PP, UK
CE Production Quality Control
No. 0086
BSI Product Services
Kitemark Court
Davy Avenue
Knowlhill, Milton Keynes
MK5 8PP, UK
