10
LOWERING AND RAISING A HYDRAULIC ADJUSTABLE FRAME SYSTEM
NOTE:
This section only applies to Frame Systems that are hydraulically adjusted. If your system is not
hydraulically adjustable and has been properly set up, disregard this section and move to the section titled
Operation and Use.
Figure 10 - Hydraulic Adjustable Frame System - Round Leg
Raising - Lock Lever Engaged
Locking Pin
Lock
Lever
Lowering - Lock Lever Disengaged
Locking Pin
Lock
Lever
Figure 11 - Hydraulic Adustable Frame System - Square Leg
Raising - Lock Lever Engaged
Lock
Tension
Spring
Lock Lever
Locking
Rope
Lowering - Lock Lever Disengaged
RAISING THE HYDRAULIC FRAME SYSTEM:
Step 1:
Verify the frame system is on level ground.
Step 2:
Crank the wheels until they are completely off the ground and verify the frame system is
fi
rmly
resting on the support pads.
Step 3:
Unwrap the hydraulic hoses and connect them to the power unit. Verify the hose connections are
secure and properly connected.
IMPORTANT:
The hydraulic hoses and power unit must be inspected before each use. Verify the hydraulic
hoses are not leaking, cracked, kinked, or contain any other defect that could cause them to fail. Inspect the
hydraulic
fi
ttings to ensure they are not leaking and working properly. Inspect the power unit according to the
supplied manufacturer’s instructions.
