Days Tilt ‘n’ Space Wheelchair User Guide
Page 14
4.16 Side shoulder pads
The height, width and angle of the side pads of the Days Tilt ‘n’ Space can be
adjusted
Loosen hexagon socket screws (SW5) at the side support holders
Position the side pad at the desired height and chest width
Tighten the hexagon socket screws again
To adjust side supports in depths, you have to
loosen plastic screws on the guide rail
To fine tune angle of side supports, pull the side
pad up
Position the side pad at the desired angle to the
chest
Release the side pad and it will lock automatically
4.17 Anti-tilt device
Always use in pairs
Anti-tilt device prevents the wheelchair from tipping backwards
This is particularly recommended for novice wheelchair users or those
with amputated legs.
Anti-tilt device is attached to the left and right of the frame as a pair.
Anti-tilt device can also be adjusted in height.
Press the positioning pin in and push the anti tip in the required position
Ensure that both sides at same height
4.18 Tilting aid
The tilt mechanism makes it easier for the assistant to tilt the
wheelchair, for example to negotiate a step
Press the lever down with the foot
Maintain the equilibrium with the handles
The anti-tilt mechanism includes integrated tilt mechanism
