Days ANI-RC440, Руководство пользователя

Страница: 8 / 18

Days Tilt ‘n’ Space Wheelchair User Guide
Page 8
4. Using the wheelchair
4.1 Setting up the wheelchair
After unpacking the wheelchair it must be made ready for use.

Lift the seat back to the upright position.

Lock the seat back to the gas cylinder for adjusting the seat back angle

Connect backrest to gas cylinder by installing the pin

Snap close the retainer to keep the pin in position

Position the seat and seat back cushions.

Attach the leg rests and fold the foot plates up.

Now you can sit down
4.2 Transporting the wheelchair
To prepare the wheelchair for transport in a car proceed as follows.

Remove the leg rests.

Release the seat back attachment to the gas cylinder.

Fold the seat back forward.

Release the parking brakes on the right and left drive wheels.

Now the wheels can be easily removed from the stub axles.
4.3 Entering and leaving from the side

Move the wheelchair as close as possible to the present or future seat side by side.

If you wish to move from another wheelchair or room chair, lock it by setting the parking brakes.

Lock the Days Tilt ‘n’ Space to prevent it from moving accidentally by setting the brake levers on the
right and left sides.

Remove the side section with the arm cushion.

Fold the foot plates to the side or remove the leg rests completely.

Now slide sideways onto the other seat.

Make sure that you are sitting as far back in the seat as possible.

Then move the arm rest and leg rests to the original position.
4.4 Entering and leaving from the front

First fold the foot plates up or remove the leg rests completely.

Move the Days Tilt ‘n’ Space as close as possible to the present or future seat until they are front to
front.

If you wish to move from another wheelchair or room chair, lock it by setting the parking brakes.

Now slide onto the seat by turning your body around.

Then move the arm rest and leg rests to the original position.