DAYLIFF HPW150, Инструкция по установке и эксплуатации

Страница: 18 / 32

16
Symbol Status
Button
Meaning
Instruction
Constantly bright
Start timing water return function
Flashing
Start manual water return function
Extinguished
Turn off water return (timing/manual) function
Display
Currently the return water is in regular timing working period
Flashing
Currently set start time of backwater working time
Display
Currently the return water is in the non-working hours
Flashing
Currently set end time of water return period
Constantly bright/
Extinguished
Timing zero cold water period 1, always on when setting, at other
conditions are off
1
1
Constantly bright/
Extinguished
Timing zero cold water period 2, always on when setting, at other
conditions are off
2
2
Constantly bright
Power/ Exit
Button
The button is locked
1. Press and hold for 1 second to turn on/off
2. In the query state, click once to return to the main interface
Constantly bright
The controller is connected to the router
Instruction of the Buttons
Up
1. Press at main interface to set the temperature.
2. Press and hold for 3 seconds in the power on/off state to enter
the query state.
3. In the query status, press and check status.
4. At parameter set status, press to modify parameters
3 Down
1. Press at main interface to set the temperature.
2. Press and hold for 3 seconds in the power on/off state to enter
the query state.
3. In the query status, click to status query.
4. Under parameter settling state, click parameter to modify
4
Mode
Button
1. In the main interface, press and hold for 3 seconds to start (and
enter zero cold water time setting)/ turn off the timing zero cold
water function; (when parameter 64=1)
2. In the main interface, short press for more than 1 second to
cancel the zero cold water function in this period; (when
parameter 64=1)
3. In the main interface, short press within 1 second to
activate/deactivate the manual zero cold water function. (when
parameter 64=1)
4. Under the main interface, click to switch between heating and
cooling operation status (when parameter 64=0)
5
Time
1. In the main interface, press to enter the clock setting, and press
to switch between “hour” and “minute”.
2. In the main interface, press and hold for 3 seconds to start (and
enter or turn off the programmed time setting).