DAVIS 6152 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 60

DAVIS 6152 Скачать руководство пользователя страница 15

11

Chapter 3
Using Your Weather Station

The console LCD screen and keyboard provide easy access to your weather
information. The large LCD display shows current and past environmental
conditions as well as a forecast of future conditions. The keyboard controls
console functions for viewing current and historical weather information, setting
and clearing alarms, changing stations types, viewing and/or changing station
settings, setting up and viewing graphs, selecting sensors, getting the forecast,
and so on.

Console Modes

The Vantage Pro2 console operates in five different modes:

Setup Mode

Setup Mode provides access to the station configuration settings that control how
the station operates. Setup Mode consists of a series of screens for selecting
console and weather station options. The screens that display in Setup Mode vary
depending on the weather station type (cabled or wireless), or if the console has a
WeatherLink connection already established. (See the

WeatherLink Getting

Started Guide

for more information on connecting your console to your

computer.)

Setup Mode Commands

Setup Mode displays when the console is first powered. This mode can be
displayed at any time to change any of the console/weather station options. Use
the following commands to enter, exit and navigate Setup Mode:
• Enter Setup Mode by pressing DONE and the - key

at the same time.

Note:

The console automatically enters Setup Mode when first powered.

• Press DONE to move to the next screen in the Setup Mode.
• Press BAR to display the previous screen in the Setup Mode.
• Exit Setup Mode by pressing and holding DONE until the Current Weather

screen displays.

Mode

Description

Setup

Use Setup Mode to enter the time, date, and other information required to

calculate and display weather data.

Current Weather

Use Current Weather Mode to read the current weather information,

change measurement units, and to set, clear or calibrate weather readings.

High/Low

High/Low Mode displays the daily, monthly or yearly high and low readings.

Alarm

Alarm Mode allows you to set, clear, and review alarm settings.

Graph

Graph Mode displays your weather data using over 100 different graphs.

«
...
13
14
15
16
17
...
»

Содержание 6152





























































Отзывы:

Нет отзывов