Page | 19
©Davis Instruments Australia V1.3
6.5 MeteoBridge Indicator Lights
Power light should always be on and solid green.
USB light will turn on once a USB data logger is connected and initialised in Select
Station. This can take a few minutes to come through.
Wi-Fi Connection flashes continually when connected to Wi-Fi
IP Connection will be flickering green when an IP station is connected and initialised
in Select Station. This can take a few minutes to come through.
Status/Reset will be solid green in normal operation. It will flash during start up,
reboots and when signalling IP address.
If flashing rapidly for a long period of time the MeteoBridge cannot find an internet
connection.
6.6 Recovering Unreachable MeteoBridge
If your MeteoBridge is unreachable on LAN or WLAN you can create a boot
configuration and load it via a USB memory stick.
http://config.meteobridge.com/
Set you Network and Station settings to the desired settings and then select the
download tab. This will save a config.zip file to your computer.
Copy this file onto a blank FAT32 formatted memory stick.
Remove power to the MeteoBridge, insert the USB memory stick and reconnect
power.
Wait for the Status light to turn solid green and connect to the MeteoBridge as
normal.
