Page | 22
©Davis Instruments Australia V1.3
6.
Write down the displayed IP address
7.
Open an internet browser and enter the IP address to open the WLIP web
interface
8.
Select “Use the following IP Address”
At this point you can either set the dynamically assigned IP as static or enter the
details of your preferred IP.
IMPORTANT: If you manually assign IP details ensure they are all correct before
continuing. Entering incorrect information can make the Weatherlink IP un-
findable
Make sure that the TCP port is set to “22222” and if you are using
weatherlink.com the upload button is checked.
9.
Write down your static IP address some where safe.
10.
Click “Save Configuration” and then “Save IP Settings”
Your IP should now be set as a static IP
