AT Command Set
Preliminary
15
Order No. DM336P-002-01
Version : DM336P-AT-P04
+FDR
Receive Data Command.
+FDT
Transmit Data Command.
+FLID=”m”
Set Local ID String.
'm' is 20 characters numeric string, set by user, to be used in TSI or CSI frame.
+FMDL?
Request Model Information.
+FMFR?
Request Manufacturer Information.
+FREV?
Request Revision Information.
The Fax class 2 mode Result codes are:
OK
Command valid and executed successfully.
ERROR
Command error and can not be executed.
+FCFR
Confirmation to receive prompt.
Modem issues the response when detects an
acceptable TCF training burst and a valid
DCS signal from remote modem.
+FCON
Facsimile connection response
Modem issues the response when detects
call progress and fax handshaking is in progress.
+FCSI:'m'
Report the called station ID response
Modem issues this after receiving the
remote ID string.
+FDCS:vr, br, wd, ln, df, er, ft, st
Report session
parameters response.
+FDIS:vr, br, wd, ln, df, er, ft, st
Report remote
capabilities response.
+FET:<ppr>
Post page message response
Modem issues this after the end of Phase C
reception, on receipt the post page
message from the transmitting modem.
0 MPS Another page, same parameters
1 EOM Anther document, new page
parameters.
2 EOP No more pages or documents.
+FHNG:m
Call termination status response
Modem issues this to indicate the call has
been terminated.
+FPTS:<ppr>
Page transfer status response
Modem issues this indicating the copy
quality and related post page message