AT Command Set
Preliminary
14
Order No. DM336P-002-01
Version : DM336P-AT-P04
PART II : FAX Command
Fax Class 1 Command
+FCLASS=n
Data or Fax Mode Selection.
+FCLASS=0 Selects Data mode operation.
+FCLASS=1 Selects Fax Class 1 mode operation.
+FAE=n
Data/Fax Auto answer.
+FRH=n
Recevie data with HDLC framing.
+FRM=n
Receive data.
+FRS=n
Receive silence.
+FTH=n
Transmit data with HDLC framing.
+FTM=n
Transmit data.
+FTS=n
Stop Transmit and wait.
Fax Class 2 Command
+FCLASS=n
Data or Fax Mode Selection.
+FCLASS=0 Selects Data mode operation.
+FCLASS=2 Selects Fax Class 2 mode operation.
+FAA=n
Fax Auto Answer Mode Selection.
+FAA=0 Disables Fax Auto Answer operation
+FAA=1 Enables Auto detection of Data or Fax
operations.
+FBOR=n
Phase C Data Bit Order Selection.
+FBOR=0 Selects direct bit order for both Phase C
data and for Phase D data.
+FBOR=1 Selects reversed bit order for Phase C data
and selects direct bit order for Phase D
data.
+FCR=
Capability to Receive.
+FCR=0 Indicates the DCE will not receive message
data. Also the DCE will not be able to poll a
remote device.
+FCR=1 Indicates the DCE can receive message
data.
+FDCS=vr, br, wd, ln, df, er, ft, st
Set Current
Session Parameter.
+FDCC=vr, br, wd, ln, df, er, ft, st
Set DCE
Capabilities Parameters.
+FDIS=vr, br, wd, ln, df, er, ft, st
Set Current
Session Negotiation Parameters.
