background image

6310-A2-ZN12-10

6310-A4 ReachDSL Modem

1

Hotwire

®

 ReachDSL

®

 v1 (MVL

®

) Modem, 

Model 6310-A4, with Inline Phone Filter 

Installation Instructions

Document Number 6310-A2-ZN12-10
December 2005

Contents 

End User License Agreement (Zhone and Affiliates)

...............................................................

1

Hotwire 6310 ReachDSL v1 (MVL) Modem Overview

..........................................................

3

Getting Started

...........................................................................................................................

6

Installing the Hotwire 6310 ReachDSL v1 Modem

..................................................................

7

Power-On

.................................................................................................................................. 10

Troubleshooting

......................................................................................................................... 11

HomeLink (for ReachDSL v1 Modems Only)

.......................................................................... 12

Increasing the Number of End-User Systems

........................................................................... 12

Cables & Connectors

................................................................................................................. 13

Optional ReachDSL Modem Wall Placement

........................................................................... 15

Technical Specifications for Hotwire 6310 ReachDSL v1 Modem

.......................................... 17

Important Safety Instructions

.................................................................................................... 18

Government Requirements

........................................................................................................ 21

Trademarks

................................................................................................................................ 22

Patent Notification

.................................................................................................................... 22

Contacting Global Service and Support

.................................................................................... 23

Technical Support

...................................................................................................................... 23

Service Requirements

................................................................................................................ 23

End User License Agreement (Zhone 

and Affiliates)

License. Zhone Technologies, Inc. and/or an affiliate ("Zhone") hereby grants you 
("User")—either an individual or a single business entity—the non-exclusive right to install, 
access, run, or inter. act with ("Use") one copy of the enclosed software (which may have been, 
or may be, provided on media, as part of a hardware platform, through download, or otherwise) 
and associated documentation ("Software") on the first computer system on which User installs 
the Software ("System") solely for internal business purposes (including, without limitation, 
providing products and services to User's customers) and subject to the restrictions below). 

Do not install this Software unless you agree to these provisions.
Return the Software promptly for a refund if you do not agree.

Summary of Contents for 6310

























Reviews: