![background image](http://html1.mh-extra.com/html/davey/monarch-ecosalt-13/monarch-ecosalt-13_installation-and-operating-instructions-manual_514284006.webp)
• Page 6 •
Once the salt level in the pool is correct the Unit may be switched On.
Note: Once the unit starts there
is a short time delay until the cell operates to ensure the filtration system is primed with water)
At
this point the
Operation LED
should be Green; if red refer below. Note: Polarity LED may be either A or B
(whichever is on or brightest.
The
RED Operation LED
will indicate a number of different possible problem situations:
Possible Problem Action
Salt Level Below Minimum
Add Salt
Cell is Calcified
Clean Cell
Water temperature very cold
Add Salt to compensate for cold water
There is a problem with water flow
Check pump / pipes for blockage or damage. Check that gas sensor is
connected properly
CONTROL PANEL LAYOUT
SELECTOR SWITCH
SANITISER OUTPUT DIAL
OPERATION LED
8:00
6
AM
FUSE
POLARITY
INDICATOR
Содержание Monarch EcoSalt 13
Страница 15: ...Page 15...