3: Operation
RT7000-MSOP
3-13
ALE Submenu
Described
To access ALE functions enter
ALPHA 17
from the Alpha menu. You can
move through the ALE menu in one of two ways:
•
By pressing the desired function number and then
E
,
or
•
By using the arrow buttons to scroll through the menu to the function and
pressing
E
For information on placing an ALE call,
refer to "Placing an ALE Call" on
page 3-21.
For detailed operating instructions, refer to the 7000ALE Radio
Control Program operator manual (7000ALE-MSOP).
(1) SCAN RATE
For selecting the rate at which scanning proceeds. The
arrow buttons toggle between
2
and
5
channels per sec-
ond. The number to the left of the scan rate
refers to
option 1 or option 2. Two seconds per channel is option
1 and 5 seconds per channel is option 2.
(
2) SCAN GRP
For selecting an ALE scan group (from 0 to 9). This
becomes the specified scan group when using
(3)
TUNE GRP
and
(9) MOD GRP
.
(
3) TUNE GRP
For automatically tuning an ALE scan group (from 0 to
9). This tunes all the channels in that scan group.
(
4) Rx SELCT
For selecting a receive type:
1
for normal ALE receive/
transmit (
Rx/Tx
);
2
for receive only (
Rx ONLY
); or
3
for channel setup (
CH Rx/Tx
) of the RC2 software.
(5) SELF ADRS
For selecting an address number to review, change, or
add for this station (from 00 to 19). To enter a new self
address, enter the number. To change an existing
address, scroll to the number and enter a new one.
(6) SELF NAME
For entering a new self address name for the address
number selected in
(5) SELF ADRS
. Any existing
address name is briefly displayed. Use the alpha char-
acters on the keypad to enter from 3 to 15 characters
(no spaces or punctuation). To delete a name enter three
periods (
...
).
30
NET OTHER (network other)
31
SET TO
32
GET LQA
33
EXIT MENU
Table 3-2. ALE Submenu
ALE
Function
Description
