Dato LJS7035, Руководство пользователя

Страница: 14 / 31

USER’S MANUAL
14
Picture 13
Chapter 4 INSTALLAION
SKILLED AND AUTHORIZED PERSONNEL ONLY SHOULD BE ALLOWED
TO PERFORM THESE OPERATIONS, FOLLOW ALL INSTRUCTIONS
SHOWN BELOW CAREFULLY, IN ORDER TO PREVENT POSSIBLE
DAMAGE TO THE CAR LIFT OR RISK OF INJURY TO PEOPLE.
Skilled technicians only appointed by the same manufacturer or by authorized dealers, are
allowed to install the car lift.
INSTALLATION REQUIREMENTS
 The car lift must be installed according to the specified safety distances from walls, pole
and what other equipments stated.
 The specified safety distances from walls must be
1000 mm at least, taking into consideration the
necessary space to work easily. Because space for
the control site and for possible runways in case of
emergency is also necessary.

The room must be previously arranged for the
power supply and pneumatic feed of the car lift.

The room must be 4000 mm in height, at least.
 The car lift can be placed on any floor, as long as it
is perfectly level and sufficiently resistant. (≥250kg/cm²,the
thickness of concrete≥150mm)

All parts of the machine must be uniformly lit with sufficient light to make sure that the
adjustment and maintenance operations can be performed safely, and without reflected
light, glare that could give rise to eye fatigue.
 The integrality of arrived goods should be checked before the lift is installed.

Moving and installing lift should follow the process as the picture instructs.
The transport and storage of machine refers to “TRANSPORT AND STORAGE” on
page 4.
Platform Installation:
-Place two platforms on the position of the location
-The bottom of cylinder is located in the frontage of
machine (the direction of getting on the vehicle)
-Use fork car or other lifting equipments to lift the
platform (Picture14) and make sure that the safety
equipment of machine is both turned on and locked.
Picture 14