Datex-Ohmeda S/5 FM, Руководство пользователя

Страница: 38 / 94

36
36
Silencing audible alarms temporarily
To silence alarms for two minutes, press the
Silence Alarms
side
panel key. To silence them for five minutes, press the key for more than
three seconds.
If the alarms are not active when you press the
Silence Alarms
side
panel key, they are pre-silenced for two or five minutes.
During silencing, all new alarms for the same reason and all alarms
for a different reason are indicated visually.
To silence the individual alarm that is currently active, press the
Silence Alarms
side panel key twice. This does not pre-silence the
upcoming alarms.
NOTE: If the monitor is connected to the network and the network
connection is lost, the silenced alarms are reactivated and the
volume level is automatically set to 7.
Reactivating silenced alarms
•
Press the
Silence Alarms
side panel key during the silencing
period.
The alarm sounds of new alarms are activated. Silenced alarms are
active after a two-minute period. Apnea alarm is activated after five
breaths.
Silencing audible alarms permanently
1. Press the
Alarms Setup
side panel key and select Audio
ON/OFF .
2. Select
Silence Apnea
,
Silence ECG
,
Silence Apn&ECG
or
Silence ALL .
If an active alarm is silenced, the monitor gives a reminder beep every
two minutes. By default, silencing alarms is set unselectable and can
only be activated through the
Installation menu. For more
information, see "Setting up the monitor before use" or the "User’s
Reference Manual."
Reactivating alarms
•
In Alarms Setup menu, select Audio ON/OFF and select Activate
Alarms .
NOTE: If the monitor is connected to the network, the bedside alarms
can also be silenced using the S/5 iCentral if this feature has been
enabled in the iCentral configuration.
WARNING: When the alarms are silenced, observe the
patient frequently.