Modifying digit fields
Setting the time and date
You can display data in up to four digit fields.
The clock format is 24 hours. A Cardiocap/5 monitor that is
connected to the monitor network follows the time and date
settings of the network.
1. Press the ComWheel and select
Monitor Setup
.
2. Select
Screen Setup
.
1. Press the ComWheel and select
Monitor Setup
.
3. Select
Digit Fields
.
2. Select
Time and Date
and adjust the time (hour, minutes, zero
seconds) and date (day, month, year).
NOTE: When fewer than four digit fields contain data, the
remaining fields are enlarged in most cases.
To prevent the loss of trend data, time settings cannot be
changed after the case is reset.
Modifying split screen
You can split a waveform display so that one part of it displays
spirometry or trend data all the time.
Modifying waveform fields
You can have up to six waveforms on the display at a time.
1. Press the ComWheel and select
Monitor Setup
.
1. Press the ComWheel and select
Monitor Setup
.
2. Select
Screen Setup
.
2. Select
Screen Setup
.
3. Select
Split Screen
and choose from the options:
None, Spiro1, Spiro2
or
Trend
.
3. Select
Waveform Fields
.
• Spiro1
is a basic view of spirometry information.
NOTE:
• Spiro2
is a basic view with additional values.
•
When fewer than six waveforms are displayed, the
remaining waveforms are enlarged in most cases.
• Trend
is a minitrend of the parameters that have been
selected to the waveform field.
•
Selecting
Combine Pressures
displays invasive pressures in the
same waveform field with the same zero line but with
individual scales.
•
If a 5-lead set is used in the ECG measurement, up to three
different ECG leads can be displayed simultaneously in
different fields.
– 12 –
