Dateq BCS25, Руководство пользователя

Страница: 14 / 28

14
Dateq BCS25 manual BCS26(E) telephone input module
EN
Master-cue
Each channel can activate the master-cue function. When the cue-button is pressed the master
module automatically selects the CUE-bus as input. This function can be activated with J10.
DJ-Mode
When jumper J11 is set to DJ, the control room will be muted when the channel is activated, all
CUE-functions will be turned off and the master module will select program or audition,
depending on the routing switches.
Cleanfeeds en Auxiliary bus
The BCS26(E) module contains 2 (mono) bus outputs which can be used to create a return signal
to, for example, an ISDN codec. The signal at these busses is post-fader. At each individual
channel of the console can be selected if they belong to one or both of the cleanfeeds by setting
jumpers J4 and J5 in the right position.
The first example shows a channel that doesn’t belong to a cleanfeed. The second example
belongs to cleanfeed one and not to cleanfeed two.
The BCS25 had two auxiliary busses. The first bus is always pre-fader; the second bus can be
configured to be pre,- or post fader. This is done with J2 ad J3.