Datcon DT1310 Series, Руководство по эксплуатации, Страница: 32 / 52

DT1310 xx xx
32
20220128-V0
7.12. Potentiometer scaling
Function When you are going to use the potentiometer with better
resolution than 1% you can assign resistance values with
1, 2, 3, 4 decimal resolution to the start and end position of
the potentiometer.
The figure shows the factory default settings. Sequence of operations
1. Select the number of decimals.
2. Type-in the start resistance value (0%, upper window),
than the end resistance value (100%, lower window).
Note:
It can be used either dot (.) or comma (,) for decimal.
When you type in more decimals the software corrects it for
one decimal after clicking on the “download settings”
button.