Datavideo TVS-3000, Инструкция по эксплуатации, Страница: 29 / 64

29
After the Category layer is created, the characters “Playlist” will be displayed as default on the
layer. At this time, users can click the “Playlist:NONE” which is located on the bottom right
corner to select the desired source/material categories for this layer from the drop-up menu.
If there is a content for the corresponding category which is played, this corresponding
content will be shown in this layer.
There are two set of buttons for Character Define and Image Alignment which are located on the right side of the
Image Content and Layout areas.
The Character Alignment buttons allow users to select the settings for
Left Alignment/Center Alignment/Right Alignment for the characters in the character layer.
The Image Alignment buttons allow users to select the layer with
image-only content for setting the corresponding alignment/cropping ways. The buttons
which is shown in the sequence of left to right is Maintain proportionality to height, Maintain
proportion to fit width, The scaled layer area is completely filled.
e.
Multi-Situation Graphic and Text Combination
Users can save up to 6 situations into one graphic and text combination. This allows users to
record different situations including location of the layer in the combination, size,
transparency and hiding. Moreover, it allows for animation transition in different situations.
After pressing the short horizontal line which is below the corresponding number allows users
to duplicate one set of situation for each layer from other numbers for further editing.
f. Adjusting the layer according to the aspect ratio
When adjusting a specific layer, users can use buttons which are located at the Proportional
adjustment zone to adjust the aspect ratio of the layer rapidly.
Those three buttons are shown in left to right sequence for “Keep the
Width ratio of the layer”, “Change to height of the layer”, “Change the layer to the
corresponding raito directly”.