Datavideo TVS-3000, Инструкция по эксплуатации

Страница: 21 / 64

21
BUFFER: This is a material list for saving all kinds of materials. Users can save videos, images,
3D virtual scenes and graphic and text combination materials into this category. Moreover,
users can assign many switching channels to show the materials of the “BUFFER” category.
Because the number of the list for the DDR, GFX and IMAGE categories is limited, users can
use the “BUFFER” category to save more video and image materials simultaneously in the
switching channels for channel switching at any time.
For the “BUFFER” category, the operation procedure for applying a specific material to the
switching channel is the same as the “CAMERA” category. At first, users need to click a specific
switching channel which is assigned to be “BUFFER”. After that, please double-click your
desired material which is saved in the “BUFFER” category and then this material will be
activated to be used or played in the corresponding switching channel.
NET
:
The RTMP, RTSP and m3u8 signals that are input by the pull-stream can be added into
this category.
Before adding the pull-stream signals into the NET category, users need to add the URL of the
signal source that is needed to be pull-streamed into the “IP Video” section in the “General
Configure” option. If users want to open the IP Video settings page, users can press the “plus”
button which is located on the bottom left side of the “NET” category. After that, users can
press the “IP Video Settings” button from the drop-up menu. Moreover, users can also press
the “IP Video Settings” option from the “Options” drop-down menu from the main interface.