Datavideo SE-2200, Инструкция по эксплуатации

Страница: 16 / 38

16
WIPE
The WIPE button is selected when a wipe effect transition
between the selected Program and Preset sources is
required. This WIPE effect is produced by then moving
the T-Bar manually or by pressing the AUTO TRANS button.
CUT
This performs a simple immediate switch from the current
main source to the selected sub source. The selected
transition wipe or MIX is not used.
AUTO TAKE
This performs an automated switch from the current
program source to the selected Preview source. The selected
transition wipe or MIX will also be used. The timing of the
transition is set by the chosen Speed button.
MIX
Pressing this button selects a basic A/B Dissolve for the next
transition.
FREEZE
Freeze the program source image or return to live video
of the selected program source. Press and hold down this
button and the Preset bus will light. While pressing this
button select the desired channel to grab a still or frozen
image.
T-Bar
This performs a manually controlled transition from the
current program source to the selected Preset source. The
selected transition wipe or dissolve will be used. When
the T-Bar has travelled as far as it can go the transition
between sources is complete. The T-Bar has indicators
next to it which light when the transition is complete.
The T-Bar can be operated in one of two modes which
are chosen by a menu option.