Datavideo PTC-305T, Инструкция по эксплуатации, Страница: 59 / 136

59
Items Descriptions
Cancel Key
If the “Cancel” key is pressed,
all of the changes will not take
effect.
8.2.1 How to Connect the PTC-305T to a Datavideo Switcher
after a 60FPS/50FPS Video Streaming (Take the HS-1300 as an
example)
When you select the 50Hz or the 60Hz option from the
「
Video
」

「
Video
Settings
」
drop-down menu in the PTC-305T web UI for streaming videos, the
PTC-305T HDMI/SDI output will be fixed at 1080p 50/60. However, the
Datavideo HS-1300 switcher supports the 1080i video format only rather than
the 1080p video format. So, when you want to connect the PTC-305T to the
HS-1300 switcher, it is necessary for you to set the PTC-305T again in order to
make sure that the video formats for the PTC-305T and the HS-1300 are
consistent. Moreover, it can assure that the input screen that is received by
the HS-1300 can be displayed correctly. Please follow following steps for
setting the PTC-305T and the HS-1300.

Take the adjustment to 1080i59.94 as an example
Step 1. At first, please press the “MENU” button which is located on the PTC-
305T remote controller to open the OSD menu.
Step 2. After the OSD menu is opened, please move down the “Microjoystick”
to select the “Setup” option, and then please press the “Microjoystick”
to enter the “Setup” option.
Step 3. In “Video Format” option, please move the “Microjoystick” to the left
or right side to select 1080i60, 1080i59.94 or 1080i50 video format.
Step 4. Please press the “MENU” button which is located on the control
panel of the HS-1300 switcher to open its OSD menu.