Datavideo PTC-140, Инструкция по эксплуатации

Страница: 21 / 84

21
6. Remote Control and On-Screen Menu
6.1 Remote Control Functions
No Item Description
1
Standby button After pressing the Standby
button for 3 seconds, the camera
will do the self-test again and
then go back to the Home
position. (Note: If power-on
mode is turned on and Preset 0 is
set, and there is no operation
within 12s, it will automatically
point to the specified preset
position).
2
Camera Address
Selection
These four keys are used to
determine which camera will be
controlled.
Press the number to determine
which camera will be controlled.
3
Number Keys
The 0-9 number keys are used to
set or to call presets.
To Set Preset:
Please press the 0-9 number keys
at first. After that, please press
the SET PRESET key and then the
corresponding preset is set
successfully. The remote
controller can set for up to 10
presets.
To Call Preset:
Press the 0-9 number keys
directly and then the preset will
be executed automatically.
Note: If there is no preset for a
specific number key, the call
preset function will be ineffective
after pressing that number key.
To Clear Preset:
Press the CLEAR PRESET key at
first and then please press one of
the 0-9 number key and then the
corresponding preset will be
cancelled.
No. Item Description