Datavideo PTC-140, Инструкция по эксплуатации

Страница: 18 / 84

18
Step 9. After the consistent resolution is selected, please press the “MENU”
button on the keyboard of the HS-1600T until the OSD is back to its first layer.
Step 10. After the OSD goes back to its first layer, please press the “Right
Arrow” button and “Down Arrow” button on the keyboard of the HS-1600T to
select the “Save Setup” option on the OSD.
Step 11. After the “Save Setup” option is selected, please press the “Right
Arrow” button again and then there are two buttons including “Yes” and “No”
will be shown on the OSD.
Step 12. Please select the “Yes” button by using the “Left or Right Arrow” key
and then please press the “Enter” button on the keyboard of the HS-1600T to
save the updated settings.
The system diagram for the PTC-140T and the HS-1600T connection is shown
as following diagram.