16
4.4 How to Connect the PTC-140T Camera to the HS-1600T
HDBaseT Portable Video Streaming Studio
The PTC-140T can be the accessory of the HS-1600T 4 Channel HD/SD
HDBaseT Portable Video Streaming Studio. The PTC-140T can be used by
connecting with the HS-1600T. Please follow following steps for connecting the
PTC-140T HDBaseT PTZ camera to the HS-1600T 4 Channel HD/SD HDBaseT
Portable Video Streaming Studio.
Step 1. Please use an RJ-45 Ethernet cable to connect from the HDBaseT
interface on the rear panel of the PTC-140T camera to the HDBaseT IN
interface on the rear panel of the HS-1600T and then the PTC-140T can be
operated with the HS-1600T.
4.4.1 Troubleshooting for the PTC-140T and the HS-1600T Connection
If the PTC-140T and the HS-1600T can not be operated after connecting the
Ethernet cables, please try following two steps for troubleshooting.
4.4.1.1 How to Set the Baud Rate of the PTC-140T Camera
The Factory Default Baud rate for the HS-1600T is 38400 and this value can
not be changed by users.
The Factory Default Baud rate for the PTC-140T is set at 38400 and there is no
need for users to change it. However, if there is something wrong when
connecting the PTC-140T with the HS-1600T, please check whether the Baud
rate of the PTC-140T is changed or not. If the Baud rate of the PTC-140T is
changed, please follow following steps for setting the value back to 38400.
Step 1. Please press the “MENU” key on the PTC-140T remote controller to
enter the OSD menu.
Step 2. After the OSD menu is shown, please press the “Down” key on the
remote controller to select Setup option. And then please press the “Home”
key to enter the Setup option.
Step 3. Please make sure that the Protocol option is set to “Auto”.
Содержание PTC-140
