Datavideo KMU-300, Инструкция по эксплуатации

Страница: 61 / 72

61
5.4 Stream and Record Buttons
The RECORD , STREAM , VERTICAL and BITRATE
buttons on the front panel of the KMU-300
give the user certain controls of the record and
stream functions. In this section, we will cover
operations of these four buttons in detail.
RECORD and STREAM Button LED behaviors are listed in the table below:
RECORD Button STREAM Button
Solid White Record function in idle state Stream function in idle state
Blinking Red
Record function is activating
or resetting Stream function is activating or
resetting
Solid Red Record function activated Stream function activated
Record Button
Press the RECORD button to start/stop recording.
Start recording

When idle, the RECORD button is solid white.

Press and hold the RECORD button for approximately 2 seconds.

When the record function is activating, the RECORD button turns from solid white,
then blinking red and finally to solid red.

When the RECORD button is solid red, this indicates that the record function has
been successfully activated.
Stop recording

While recording, the RECORD button is solid red.

Press and hold the RECORD button for approximately 2 seconds.

When the record function is terminating, the RECORD button turns from solid red,
then blinking red and finally to solid white.

When the RECORD button is solid white, this indicates that the record function has
been successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
Start streaming

When idle, the STREAM button is solid white.

Press and hold the STREAM button for approximately 2 seconds.