Datavideo KMU-300, Инструкция по эксплуатации

Страница: 48 / 72

48
Network Setting
In network settings, you can either manually enter the IP address or set the device to DHCP
mode which allows the router to automatically assign the IP address to the NVS-31 MARK IV.
DHCP
In DHCP mode, the router automatically assigns the IP address to the device. If you want to
manually configure the network settings, disable this option.
Static IP Address
If the DHCP is disabled, the static IP field will be activated for the user to manually enter the
IP address. The static IP address is 192.168.1.200 by default.
Tip: If you do not know the device’s IP address, you can always use the following method
to reset the network settings.

Shut down the machine

Turn on the machine while holding down RECORD and STREAM buttons
simultaneously.

Approximately after 5 seconds, release the RECORD and STREAM buttons as soon as
the button LEDs are turned ON .

The default IP address should be 192.168.1.200.
Subnet Mask
Static IP address mode requires the subnet mask , which is 255.255.255.0 by default.
Default Gateway
Static IP address mode requires the default gateway , which is 192.168.1.254 by default.
Primary DNS (Optional)
Primary DNS is required in static IP mode only but is optional.
Secondary DNS (Optional)
Secondary DNS is required in static IP mode only but is optional.
Account and Password
New Account : It can be used to set the Account of the NVS-31 MARK IV, please press the Apply
button after the Account is set.
New Password : It can be used to set the Password of the NVS-31 MARK IV, please press the Apply
button after the Password is set.
Time Setting
In time setting, you are allowed to select the reference time source for the NVS-31 MARK IV.