Datavideo KMU-300, Инструкция по эксплуатации

Страница: 40 / 72

40

24fps – This is the standard for movies and TV shows, and it was determined to be
the minimum speed needed to capture video while still maintaining realistic motion.

30fps – Videos with a lot of motion, such as sports, will often benefit from the extra
frames per second.

60+fps – Anything higher than 30fps is mainly used to create slow motion video or to
record video game footage.
Video Bitrate (bps)
The bitrate of the video specifies the amount of information stored in the video. The higher
the bitrate is, the clearer the video is.
Available video bitrates are listed as follows:

16M

12M

8M

6M

4M

2M

1M

512K

256K
Recommended video bitrates

720P or lower – 8 – 10 mbps

1080P or higher – 15 mbps or higher
Encoder Mode
The Encoder Mode sets the video bitrate mode for your recording. The available modes are
listed as follows:

High (8M)

Medium (4M)

Low (2M)
Tip: You can also switch between different bitrate modes by pressing the Bitrate button in
the H.264 Encoder button group. See Section 5.4 for details.
Profile
Profile
sets the H.264 encoding profile for your recorder. The available options are Baseline ,
Main , and High . Typically, High profile provides the best image quality and is suitable in
most instances. However, depending on the decoder used when viewing the recording, a
Main or Baseline profile may be required.

High