INSERTING HARD DRIVES IN THE RAID UNIT
To assemble the RAID Unit, please follow the steps listed in the instructions below:
1.
Place the RAID Unit with its Bottom View facing you. Unfasten all four (4) Casing
Screws with a Phillips screwdriver.
Afterwards, turn the RAID Unit to its Cover side.
2. Lift the Cover upward to remove it. When opened, the PCBA boards (Printed Circuit
Board) should be securely in place inside the RAID Unit.
HDD Placement Holders
HDD Screws
Disk1
Disk2
10
Содержание AIR
Страница 1: ......