5. During the rebuild, a “Rebuild Percentage” status window will appear and the
information under “RAID Status” and “Disk Information” sections should reflect
the same.
If data is accessed while the chipset is processing the Rebuild task, the speed
of data access may vary or decrease. Hence, data access of the HDD(s) during
Rebuild is highly not recommended.
Even if the RAID Unit loses connection to the host, the Rebuild will continue. If the
RAID Unit is powered off, the RAID Unit will retain the Rebuild status in its memory.
When the RAID Unit is powered “on” again, the Rebuild process will resume from the
previous status.
6.
After the rebuild is completed, data from
Old
HDD will be copied onto the
New
HDD under RAID 1 mode.
26
Содержание AIR
Страница 1: ......