Datasat DN200, Инструкция по установке и эксплуатации

Страница: 25 / 43

DN200 User Manual Rel 1.0
1.9 Administration
1.9.1 Adding Users & Changing Password
Changing the root password, can be done through the web interface under the “settings” heading.
1.10 DHCP Configuration
The DN200 can be configured as a controller less Mesh Point Portal [MPP] or a controller based Mesh
Point [MP]. When configured as MPP, DHCP addresses are allocated by the MPP. The DHCP
Directives in the main configuration screen drive the behavior of the unit. Normally, the DHCP server
running on the network manager serves all the clients connecting to the units within a block. The DHCP
server needs to be aware of the subnets at the access points and be able to assign dynamic addresses
based on those subnets.
The DHCP server shall assign a common DNS server to all the clients within the block.
The DHCP server shall be aware of the access point IP address from which the DHCP lease request is
received for a client. This IP address is the default router, which shall be assigned to the client requesting
DHCP lease.
The block network topology comprises several units and each unit may have an AP within a subnet
different from that of the DHCP interface. It is therefore necessary that the unit in which the client
connects forward DHCP requests to the DHCP server. The DHCP server will then detect the subnet of
the AP from which the DHCP request was originally received and will assign the requesting client an IP
address within that same subnet.
In the example below, the network manager issues the addresses.