Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
4.2
Accessing Web Page
4.2.1
From LAN port
1. Make sure your PC have connected
to the router’s LAN port correctly.
Notice:
You may either simply set up your computer to get IP dynamically from the router or set up the IP address of the computer to be the same subnet as
the
default IP address of router is 192.168.1.1
. For the detailed information, please refer to the later section -
Trouble shooting of the guide.
2. Open a web browser on your PC and type
http://192.168.1.1.
The following window will be open to ask for username and
password.
Notice
: If you fail to access to the web configuration, please go to “Trouble
Shooting” for detecting and solving your problems.
3. The web page can be logged out after 5 minutes without any operation.
4.2.2
From WAN port
1. Make sure your PC can
connect to the router’s WAN port correctly.
2. Getting the IP addresses of WAN port using Voice prompt.
3. Open a web browser on your PC and type
http://<
IP address of WAN port>.
The following window will be open to ask for
username and password.