Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
Notice:
◆
When using Voice Menu, press * (star) to return the main menu.
◆
If any changes made in the IP assignment mode, please reboot the CDS9010 to take the setting into effect.
◆
When enter IP address or subnet mask, use
“*”(Star) to replace “.” (Dot).
For example, to enter the IP address 192.168.20.159 by keypad, press these keys: 192*168*20*159, use the #(pound) key to indicate
that you have finished entering the IP address.
◆
#(pound) key to indicate that you have finish entering the IP address or subnet mask
◆
When assigning IP address in Static IP mode, setting IP address, subnet mask and default gateway is a must. If in DHCP mode,
please make sure that DHCP SERVER is available in your existing broadband connection to which WAN port of CDS9010 is
connected.
◆
The default LAN port IP address of CDS9010 is 192.168.1.1 and do not set the WAN port IP address of CDS9010 in the same
network segment of LAN port of CDS9010, otherwise it may lead to the CDS9010 fail to work properly.
◆
You can enter the password by phone keypad, the matching table between number and letters as follows:
⚫
To input: D, E, F, d, e, f -- press ‘3’
⚫
To input: G, H, I, g, h, i -- press ‘4’
⚫
To input: J, K, L, j, k, l -- press ‘5’
⚫
To input: M, N, O, m, n, o -- press ‘6’
⚫
To input: P, Q, R, S, p, q, r, s -- press ‘7’
⚫
To input: T, U, V, t, u, v -- press ‘8’
⚫
To input: W, X, Y, Z, w, x, y, z -- press ‘9’
⚫
To input all other characters in the administrator password-----press ‘0’,
E.g. password is ‘admin-admin’, press ‘236460263’
