Copyright © 2019 - All rights reserved by DataRemote Incorporated
V1.0
4.8
Setting up WAN Failover
4.8.1
WAN Failover List
WAN Failover works in multiple outbound links to assure that you maintain Internet connectivity if a loss of connectivity occurs on one of
your WAN connections. If one of your ISP links goes down, WAN Failover will automatically route all traffic over the other WAN(s) until
service is restored.
CDS9010 allows failover of the default route to WAN
interfaces. This part of settings allows ranking each WAN
interface in order of preferred usage for the default route.
The default route will always be set to the highest-priority
connected WAN interface. The assignment changes as
WAN interfaces connect or disconnect from the current
network.
Default Route Selection support WAN/ WiFi 2.4G/ LTE
and WiFi 5.0G. WAN Failover list switch over from
Number1 (highest priority) to Number 4 (lowest priority).