3-7
Part No. 001-2100-XXX
Tx Power
Tx Power allows the user to vary the power output setting of the transmitter.
Default Freqs
The Default Freqs button returns the Rx and Tx frequencies to default values. The default frequencies are based on
radio type and range.
Default Power
The Default Power button allows the user to return the Tx Power to factory power output settings.
3.2.3 VERSION REQUEST
Figure 3-6 JSLM2 Version Request
(Settings shown are for reference only)
Version Request displays JSLM2 hardware and firmware version information.
3.2.4 READ/WRITE PROGRAMMABLE SETTINGS
Read Programmable Settings
Read Programmable Settings reads and displays the programmable settings currently programmed in the
EEPROM of the JSLM2.
Write Programmable Settings
Write Programmable Settings writes the currently loaded settings to the EEPROM of the JSLM2.
3.2.5 PORT SETTINGS
Port Settings are used to configure the user PC’s serial COM ports (Primary and Secondary). Port Settings can be
used to test data links using the ASCII and HEX terminals (available in the Utilities menu). The JSLM2 Field
Programming Software will override these settings when using any other screen to communicate with the JSLM2.
NOTE: A modem is required to transmit serial data using this program. The JSLM2 is an analog signal device.
