manualshive.com logo in svg

Dataradio JSLM2, Руководство пользователя

Поделиться
Скачать
Dataradio JSLM2 Скачать руководство пользователя страница 32

Appendix A

Technical Support Application Note

A-1

001-2100-XXX

Technical Support Application Note

#0600003

Dataradio COR Ltd.

USA 800-992-7774 Ext. 6701; International 507-833-8819

Product: JSLM2 Transceiver – DL-3282 Bell 103, Bell 202 Modem Configuration

Application:

To provide technical information for connecting a JSLM2 analog transceiver with a DL-3282 RS-232 
Modem. The JSLM2 transceiver family is designated as part number 242-2140-XXX for UHF 
models or 242-2110-XXX for VHF models. The DL-3282 Modem is part number 250-3282-002 and is 
available as Bell 202 or Bell 103 format. Combined with an interface cable (part number 697-3414-003), 
the transceiver and modem provide a reliable 300 baud or 1200 baud RS-232 serial Dataradio system.

Setup:

DL-3282 Modem: The DL-3282 modem does not require special programming for normal Bell 202 or 
Bell 103 format. All data parameters are set using an eight-position DIP switch located inside the modem. 

Programming:

RNet JSLM Transceiver – The RNet JSLM transceiver is computer programmable using the Windows® 
based programming kit (part number 250-2100-001). (The Field Programming Software requires Win-
dows® 98 or later.) This kit includes the programming software , the programming cable and user manual 
(on CD-ROM). Software upgrades are available on our website at 
http://www.dataradio.com/downloads.html

Table 1: DL-3282 Dip Switch Functions

Position Function 

Factory 

Default 

1. Normal/Loop 

Normal operation/loopback test mode 

Off-normal 

2. Conventional 

Normal operation or interface to 
trunking radio system 

Off - conventional 

3. Bell 202/103 

Selects modem format 

Off – Bell 202 

4. Squelch Invert 

Carrier Detect inversion 

Off – Active high 

5. Half/Full Duplex 

Duplex mode determination 

Off – Half 

6. Option 1  

Self-test mode 

Off – Self-test off 

7. and 8.    
    RTS/CTS Delay 

 
Set RTS/CTS Delay Timer 

On, On – 240 msec 
delay 

 

Содержание JSLM2




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды