Dataradio JSLM2 Скачать руководство пользователя страница 35

DATA TELEMETRY PRODUCT WARRANTY

Dataradio COR Ltd. ("DRL") warrants to the original purchaser for use
("Buyer") that data telemetry products manufactured by DRL
("Products") are free from defects in material and workmanship and
will conform to DRL's published technical specifications for a period of,
except as noted below, two (2) years from the date of shipment to
Buyer. DRL makes no warranty with respect to any equipment not
manufactured by DRL, and any such equipment shall carry the original
equipment manufacturer's warranty only.  DRL further makes no
warranty as to and specifically disclaims liability for, availability, range,
coverage, grade of service or operation of the repeater system
provided by the carrier or repeater operator. Any return shipping
charges for third party equipment to their respective repair facilities
are chargeable and will be passed on to the Buyer.

If any Product fails to meet the warranty set forth above during the
applicable warranty period and is returned to a location designated by
DRL. DRL, at its option, shall either repair or replace such defective
Product, directly or through an authorized service agent, within thirty
(30) days of receipt of same.  No Products may be returned without
prior authorization from DRL.  Any repaired or replaced Products shall
be warranted for the remainder of the original warranty period.  Buyer
shall pay all shipping charges, handling charges, fees and duties for
returning defective Products to DRL or DRL's authorized service agent.
DRL will pay the return shipping charges if the Product is repaired or
replaced under warranty, exclusive of fees and duties.  Repair or
replacement of defective Products as set forth in this paragraph fulfills
any and all warranty obligations on the part of DRL.

This warranty is void and DRL shall not be obligated to replace or
repair any Products if (i) the Product has been used in other than its
normal and customary manner; (ii) the Product has been subject to
misuse, accident, neglect or damage or has been used other than with
DRL approved accessories and equipment; (iii) unauthorized alteration
or repairs have been made or unapproved parts have been used in or
with the Product; or (iv) Buyer failed to notify DRL or DRL's authorized
service agent of the defect during the applicable warranty period. DRL
is the final arbiter of such claims.

THE AFORESAID WARRANTIES ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED AND IMPLIED, INCLUDING BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.  DRL AND BUYER AGREE
THAT BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ANY OF
SAID WARRANTIES IT AS SET FORTH ABOVE.  BUYER AGREES THAT
IN NO EVENT SHALL DRL BE LIABLE FOR INCIDENTAL, 
CONSEQUENTIAL, SPECIAL, INDIRECT OR EXEMPLARY DAMAGES
WHETHER ON THE BASIS OF NEGLIGENCE, STRICT LIABILITY OR
OTHERWISE.  The purpose of the exclusive remedies set forth above
shall be to provide Buyer with repair or replacement of non-complying
Products in the manner provided above.  These exclusive remedies
shall not be deemed to have failed of their essential purpose so long
as DRL is willing and able to repair or replace non-complying Products
in the manner set forth above.

This warranty applies to all Products sold worldwide.

Some states do not allow limitations on implied warranties so the
above limitations may not be applicable.  You may also have other
rights which vary from state to state.

E

EX

XC

CE

EP

PT

TIIO

ON

NS

S

O

ON

NE

E  Y

YE

EA

AR

R:  

Labor to replace defective parts in repeaters or

base stations

T

TH

HIIR

RT

TY

Y  D

DA

AY

Y:

Tuning and adjustment of telemetry radios

N

NO

O  W

WA

AR

RR

RA

AN

NT

TY

Y:

Fuses, lamps and other expendable parts

Effective 01/2004

W I R E L E S S   D A T A

 

Dataradio COR Ltd.  299 Johnson Avenue, Suite 110,  Waseca, MN 56093-0833:  Tel: (507) 833-8819 or (800) 992-7774; Fax: (507) 833-6748  Visit us on the web at www.dataradio.com

Содержание JSLM2




































Отзывы: