A-3
001-2100-XXX
Clicking OK will close the Settings (or Radio, Frequencies) window and save current settings to local mem-
ory. A Write must be performed to program settings to the JSLM2.
Connections:
Connection between the JSLM2 and DL-3282 is made with the interface cable (697-3414-003).
Figure 1 Typical JSLM2 - Modem Configuration Connection
Table 2: Recommended JSLM2 Programming Settings (for interfacing with
DL-3282 Modem)
CD – Carrier Detect
Active high (Settings tab)
RS – Ready to Send
Active high (Settings tab)
PTT – Push to Talk
Active low (Settings tab)
Mic Mute
On (Settings tab)
Squelch Disable
Off (Settings tab)
Rx De-emphasis
Off (Settings tab)
Tx Pre-emphasis
Off (Settings tab)
RNET Xtal Compatibility
Mode
Off (Settings tab)
PTT Watchdog
Optional (Radio tab Revs A - I)
Carrier Detect
On: -110 dBm; Off: -115 dBm Carrier Detect
settings are selected to optimize the system
based on Receive Signal Strength. (Radio tab)
